Moisture mitigation systems are used to block osmotic and hydrostatic pressure, especially in areas of high water concentration in the soil. Our moisture mitigation systems can be installed underneath tile, carpet, or any surface that requires blocking moisture from a slab.

 

PlexiCrete™ Speed Top SL

NO BBP

PlexiCrete Speed Top SL is a self-priming four component, 100% solids, high performance urethane mortar flooring system comprised of a urethane binder, pigments, powders and quartz aggregates. It is designed for a variety of applications on concrete or steel. This system provides conventional protection plus thermal-shock resistance, with a wide range of both caustic and acid resistance. Leader in BBP (Benzyl Butyl Phthalate) free seamless urethane mortar flooring.


PlexiFloor™ EpoCrete

PlexiFloor EpoCrete is a three component, water based, solvent-free, moisture tolerant epoxy high performance cementitious self-leveling slurry mortar. It is particularly formulated for leveling and for the necessary preparation of slabs with excessive water vapor transmission rates at thicknesses of 120-160 mils. See full product details››


PlexiGlaze™ MVB 2000

Waterproofing System

A SYSTEM FOR THE REDUCTION OF MOISTURE VAPOR EMISSION

PlexiGlaze MVB 2000 is a one-coat system which consists of a unique combination of epoxy resins and other chemical substances. It is specifically formulated to overcome the inferior adhesion properties of most resin based systems when curing in an environment of constant wetness, extreme alkalinity (pH 13¬:14) and water vapor drive. See full product details››


PROCRETE 1000 OPB

Osmotic Pressure Barrier

Polymer Modified Cementitious Grout

PROCRETE 1000 OPB is a one component, Polymer modified resurfacing mortar with higher performance characteristics for use when placed as an overlay, thin patch or higher strengths are required.


OPB Data Sheetpdf